Mal wieder basteln

Tron Lampe

Nachdem ich schon mit meinem ersten Vorhaben - einen AT-T Snowwalker zu basteln - gescheitert bin habe ich mir nach meiner täglichen Lektüre des Stylespion heute fest vorgenommen diese Tron Lampe im Selbstversuch zu bauen. Genau wie beim letzten Mal gilt. Wer es vor mir schafft und mir ein Beweisfoto schickt bekommt n Shirt geschenkt. Word! :-) Ich gebe zu der Snowwalker war die Hölle und allein die Idee es schaffen zu können ein wenig arrogant (bei meinem handwerklichen Geschick:-)) Wer geht die Wette mit?

Verwandte Artikel

[ratings]

12 Kommentare zu “Mal wieder basteln”

  1. Fabs

    ich bin dabei ^^ muss mir aber ersmal überlegen was ich mir so zurechtschneiden soll…mhh aber ermal muss ich noch für die schule lernen morgn klausur..grml…ach und am donnerstag noch theretische führerscheinprüfung…:D naja danach mach ich das aber! XD

  2. Andre

    Ahh ein Herausforderer! :-) Seeehr gut. Das spornt mich an.

    Dann wünsch ich dir mal viel Glück bei deiner Klausur und der Prüfung! Wird schon! ABT ist bei dir in Gedanken! :-)

    Dann leg ich am Donnerstag los :-)

  3. Fabs

    hey cool alles klar! also die klausur war so lala ^^
    naja dann wär das dann mal abgemacht ;)

  4. astro3000

    bin auch dabei! es is ne höllen arbeit oh mann was hab ich da nur angefangen

  5. Andre

    Aaah der zweite Herausforderer :-)

    Seehr geil astro.

  6. astro3000

    wie liegen wir den in der zeit bei unserem troncyberlighspeedrace? meine platine ist als stencil auf A3 angelegt und raport fähig yeah. so was aufwändiges habe ich bisher noch nicht geschnitten. so und jetzt weitermachen.

    gruß astro

    if you want to buy fake spacesuits, astronaut icecream and rocks from the red planet astro3000

    please cick the red astrobotic sign below or paste http://web.mac.com/astro3000
    in your internet rocketlauncher.

    «∆s†®°

    To explore and work in space,
    human beings must take their environment with them because there is no atmospheric pressure and no oxygen to sustain life. Inside the spacecraft, the atmosphere can be controlled so that special clothing is not needed. But in order to work outside the spacecraft, humans need the protection of a spacesuit. Earth’s atmosphere is 20 percent oxygen and 80 percent nitrogen from sea level to about 120 km. At 5,500 m, the atmosphere is half as dense as it is on the ground, and at altitudes above
    12.000 m, air is so thin and the amount of oxygen so small that pressure oxygen masks no longer do the job. Above the 19,000 m threshold, humans must wear spacesuits that supply oxygen for
    breathing and that maintain a pressure around the body to keep body fluids in the liquid state. At this altitude the total air pressure is no longer sufficient to keep body fluids from boiling. US spacesuits have been pressurized at 0.30 bar (30% earth sea level pressure), but because the gas in the suit is 100 percent oxygen instead of 20 percent, the person in a spacesuit actually has more oxygen to breathe than
    is available at an altitude of 3,000 m without the spacesuit. At the US suit pressure, before leaving to perform tasks in space, an astronaut has to spend several hours breathing pure oxygen before proceeding into space. This procedure is necessary to remove nitrogen dissolved in body fluids and thereby to prevent its release as gas bubbles when pressure is reduced; a condition commonly called “the bends”. Russian and future NASA suits are pressurized to 0.56 bar, shortening the pre-breathing
    period to half an hour. A spacesuit also shields the astronaut from bombardment by micrometeoroids and insulates the wearer from the temperature extremes of space. Without the Earth’s atmosphere to filter the sunlight, the side of the suit facing the Sun may be heated to a temperature as high as 120 degrees C; the other side, exposed to darkness of deep space, may get as cold as -160 degrees C. Paradoxically,
    the suit’s life support system has to remove the heat and moisture generated by the sweaty working astronaut.This is usually accomplished by circulating cool water through an undergarment worn next to the astronaut’s skin. Heat overload of space suits caused several crises on the first space walks in the Voskhod and Gemini programs. Early US space suits were adapted from pressure suits designed for pilots of high altitude military and experimental aircraft. The first suits designed from the beginning for use in space were the American A7L and Soviet Krechet suits. These were designed for walking on the moon during the space race of the 1960’s. They provided the basis for those used aboard space station and shuttle missions.
    The search for the perfect suit continues. It would seem the next major step will be suits suitable for use on the surface of Mars. These will have very different design criteria than those used in zero-G.

  7. Fabs

    bin fertig :)
    so wo soll ich die pics hinschicken..? hehe

  8. astro3000

    ich bin fertig heute abend gibts ein bild!

  9. Andre

    What? Oh man ihr seid der Hammer! Pics an andre@…

    Ich poste die dann hier.

  10. astro3000

    bin echt gespannt auf die lampe vom fabs.

  11. Andre

    Fabs ist fertig :-) Fotos hab ich und werd sie vielleicht heiute oder morgen bloggen. Also Fabs hat sein Shirt sicher. :-) Wenn du es auch noch schaffst bekommste auch eins. Ich loose hier eh total ab merk ich grad. :-)

  12. A better tomorrow - Blog » Blog Archive » Tron Lampen Bastel Winner

    [...] Dientag hatte ich mal wieder ne Bastel Wette in den Raum geworfen. Ich hatte ja wieder Angst, das die Aufgabe zu schwierig sei…doch ich [...]

Einen Kommentar schreiben:


Livecommunity powered by six groups